GAS Detector

GMS-1000 is Single-channel fix gas monitoring unit to monitor gas leakages from remotely located gas detectors simultaneously. With indication for Normal/ Fault/Alarm I & II along with Accept / R-set Button to cancel the Alarm. GMS– 1000 is composed of one monitoring unit more than Six Gas Leak detectors.

While each Channel receive 4 - 20mA density signals from external gas detec- tors, when the density becomes higher than alarm value to give signal to moni- toring Panel to sound alarm. Monitoring Panel gives digital display Low Alarm and High Alarm with two level Audio visual alarm.

GMS-2000 transmits the relay output connecting with existing Fire Alarm System also additional relay contact output to give and signal various Shutdown de- vice for composition of integrated gas monitoring system.

FEATURES

Readout Displays - A separate three-digit LED readout provided for displaying the gas value from the sensors. The readout display configured to read any value between 0.5 through 300ppm, for ppm levels or 0-100%, for percentage levels.

Controlled and is capable of Receiving 4-20mA analogue continuous signals from gas detectors simultaneously which can be 4 wire and displaying the digital signals accurately by built-in high resolution A/D converter.

Built-in high resolution D/A converter for accurate transmission of 4-20mA stan- dard current output signal to external controllers (PLC/DDC).

Relay output for interlocking with external devices such as fire Panel or Shut down device.

Centralized gas monitoring communication is available by connection of RS485.

High/low Alarm Set Point Levels - Two separate alarm set point levels provided for the sensor.

Audible Alarm - A 110 dB audible horn provided an alarm condition occurs.

Robust aluminum frame with Powder coating.

APPLICATIONS
Methane/CNG/LNG Gas Storage Areas	GAS Bullet & Banks	Hotel
Restaurant	Kitchens	Canteen
Gas Range and ovens	Gas clothes dryers	Heaters
Industrial Canteens	Gas Feeling Stations	Spray-paint

GAS DETECTION

GAS DETECTOR