-

Swing Barriers

  • Home
  • Products
  • Barriers
  • Swing Barriers

Swing Barriers

Description

Swing Barriers is one of the serial products of intelligent passage management system from our company. It possesses superiority incomparable with the traditional management mode. Whether on the control of right of passenger for passing, or on tolling, attendant or counting of the passenger, there will be a great deal of man power and material, a lot of spending, a large amount of work and a very low efficiency resulted with the traditional management mode. However, it is the strong merit point of the intelligent passage management product to solve the problems of this kind. It is the scientific crystallization of the highly development of social civilization and it opens a new era for the scientific management.

With compact and modern design, swing barrier provides the best efficiency of multi-access in an economic space. Our barrier provides bilateral electric remote control and can integrate access control devices including RFID or print, face and vein devices. When a valid card is swiped, the electric flaps open and allow a single authorized access. Whereas an alarm will be triggered by unauthorized access or reversed access. With smooth operation and high durability, swing barrier are optimal choices of entrance control.

Features

Remote control and management

Online/offline operation

Permissions validation and anti-tailgating

Remaining open/closed mode selectable

Remote control and management

IP conflict detection

Bidirectional (Entering/Exiting) lane

Anti-forced-accessing

Excellent performance and fast speed with 32-bit high-speed processor

TCP/IP network communication and network speed adaptive

The barrier will be locked or stop working when people are nipped

Self-detection, Self-diagnostics, and automatic alarm

LED indicates the entrance/exit and passing status

Audible and visual alarm will be triggered when detecting intrusion, climbing over barrier

TECHNICAL DATA
General
Throughput
20 to 60 persons per minute The actual throughput is affected by the person passing rate and passing method
Power supply method
100 to 240 VAC; 50 to 60 Hz
IR light detectors
6 pairs
Working temperature
-20 °C to 65 °C (-4 °F to 149 °F)
Lane width
550 mm to 1100 mm
Barrier material
Stainless steel pipe; Acrylic glass
Working humidity
10% to 95% (No Condensing)
Pedestal material
stainless steel
Dimensions
Without packaging: 1200 mm × 200 mm × 1020 mm (47.2" × 7.9" × 40.2") With packaging: 1408 mm × 348 mm × 1156 mm (55.4" × 13.7" × 45.5")
Application environment
Indoor and outdoor

Maintenance

Description

The main element of the turnstile is stainless steel, which is rustless (antioxidant) and corrosion resistant (The anti corrosion ability in the medium of acid, alkali, and salt). In order to keep the stainless steel from being oxidized or corroded, you should clean and care the turnstile surface periodically . The instructions and tips for maintaining the turnstile are as follows:

  • Select different stainless steel types according to the variety of the environments. You can select 304 stainless steel for common circumstances and 316 stainless steel for the scenarios of seasides and chemical plants.
  • Keep the device surface clean and dry.
  • Use non-woven cloth and ethyl alcohol to clean the dirt on the device surface.
  • Use sourcing pad (do not use mesh cleaning ball) to clean the rust on the device surface by following the wire drawing on the stainless steel. And then use non-woven cloth and stainless steel cleaner to wipe the device surface.
  • Clean and maintain the device by using non-woven cloth and stainless steel cleaner periodically. It is suggest to clean the device every month in common circumstances and every week for severe environments (seaside and chemical plants for instance).
    • APPLICATION
    It park Hospital Commercial building Airport Government office
    Shooping mall Sea ports Railway station Toll tax booth Housing societys Apartments